Eleaf Vape
The number one question I receive on a daily basis, here it is. Hey, RiP, I'm looking to quit the cigs. I'm looking to kick those suckers, but I have a tight budget. I'm looking for something that's gonna give me the best bang for my buck. What is it? That's the number one question I receive on a daily basis. I'm gonna tell you right now, if you're a newbie watching and let's say you're still smoking, you right now, you're smoking a cigarette and you're looking into vaping. This is the way to
Video Transcript: A Simple Vaper's Dream! The iJust2 Kit by Eleaf by RiP Trippers
The number one question I receive on a daily basis, here it is. Hey, RiP, I'm looking to quit the cigs. I'm looking to kick those suckers, but I have a tight budget. I'm looking for something that's gonna give me the best bang for my buck. What is it? That's the number one question I receive on a daily basis. I'm gonna tell you right now, if you're a newbie watching and let's say you're still smoking, you right now, you're smoking a cigarette and you're looking into vaping. This is the way to go, it's cheap, it's like anywhere between 30 and 35 bucks is what I'm seeing online. Thirty to thirty-five bucks, sweet. You get a tank. You get a coil head. You get a battery tube. It's got a 2,600 milliamp hour battery in here, okay. It's only got one button. No mini screen. Easy peasy, what a sleazy. Right now, the battery is reading around 4.1, 4.2 volts. Here we go.
Thirty to thirty-five bucks. It comes with a 0.30 ohm coil head by the way, you pop it in there, you fill her up, and you're good. And it holds 5.5 mills of e-juice. Five point five mills of juice. Full on flavor, baby. So you know what I think? It's about that time we go ahead and dive down. I'm gonna show you this thing up close and personal. And then we're gonna come back and I'm gonna talk about some of the cons that I have for it. And then we'll wrap this sucker up and I'll let you know where you get one. Alrighty. So here's the iJust 2 boxing. Pop the lid. Oh hoo hoo. We got our battery tube and our tank and then underneath that, what'd we got? What'd I got? We got an instructional manual, a USB cable, and it's a silicon ASC ring.
So here's the iJust 2 battery tube. Few specs for you. She's 81 millimeters in length, and then in width she's 22 millimeters. Here is the fire button right here. On the front, like I said, it says iJust 2. And then on the back it says, Eleaf. Up here on the top, you got your USB port for charging, and there she is, a close up view of this USB port. And there's the top of this device. You get your 510 threads which are smooth, and it also has a spring loaded 510 pin, and you also have these four grooves. That is for devices that take the airflow through the 510 connection. And here's the bottom of this device. As you guys can see it says, Eleaf, the guys that manufacture this product. It says premium quality. It also says, iJust 2. And then in the center, you got your hole for battery venting.
And like I mentioned in face time this iJust 2 mod, okay. She's an unregulated device. She has a 2600 milliamp hour battery in here and she also has safety features. She's got a 10 second vape time cutoff. She's got short circuit protection below 0.15 ohms, and she's got low voltage protection below 3.3 volts. When she's fully charged, she starts at 4.2 volts, and she drops and drops and drops and drops. You feel it, it gets weaker and weaker. Like I mentioned before, here's the fire button up top, nice clicky fire button. But it's five clicks to turn the sucker on, and when you turn it on, you're gonna see the lights inside here flash. One, two, three, four, five. See that? And every time you press it, she lights up. Press it again, you'll be able to see it through the USB port. See that?
When the battery starts to get low, that light you see, that light right there, okay? It starts to blink more frequently. That's how you know the batteries low. But like I said, this is unregulated. You're gonna be able to feel it. It's unregulated. It's just gonna drop, drop, drop, drop, drop. You got it? I do wanna point this out, though, this fire button is a little loose. It does rattle a little bit. But, you have five clicks of this fire button to turn her off. One, two, three, four, five. She blinks and she's off. When you press it, it doesn't light up. So yeah, any 22 millimeter tank is gonna look the tits on here, any 22 millimeter RDA is gonna look the tits as well. Here's the sparkle tank, the sparkle tank. Oh yeah, nice and flush baby. I've gotten this two modified coil heads all the way down 0.2 ohms. This is a 0.5 ohm coil head in here right now.
Go ahead and screw this Aspire Triton on here. Still looks the tits. I mean this tank is 22.5 millimeters in diameter, but it's still, it looks good. Looks like a high-end device. So here's the iJust 2 tank that comes with this device or this kit. Spiffy. So here's a close up view of this iJust 2 tank. Few specs for you. She's primarily made of stainless steel. She got a pyrex tank. She's 67.5 millimeters in length or height, and then she's 22 millimeters in width. Here's your airflow down here. You got one, two, three, and four slots, and she's wide open baby. There is your 510 connection, 510 threads. Nice smooth, smooth, smooth. You got a non-adjustable, stainless steel pin. Oh yeah. And this tank holds 5.5 mills of e-liquid. Here's the stainless steel drip tip that comes with this device.
She's double o-ringed at the top. The board is 10 millimeters, about 10 millimeters, then it tapers down to about six millimeters at the base. Tank section unscrews from the base just like so. Coil head screws into the base, and the coil that comes with this device is a 0.3 ohm coil head. I'll go ahead and show you that. 0.3 ohm coil head. You got four feed holes. Suggested vape range, 30 to 80 watts. And here's the top view of this coil head. Now the coil head is a 0.3 ohm dual vertical parallel coil. You got the screen up top for spit back. Oh yeah, and another thing this coil head uses organic Japanese cotton as wicking material. Again, here is the tank section up top. You have the drip tip catch cup for your drip tip, and then you have to turn it upside down to fill her up. You got the two slots, two slots on each side, and you stick your dropper in there. Either way. Glass dropper, bottle dropper, plastic dropper, syringe, doesn't matter. And you fill her up.
And like I said, she holds 5.5 mills of e-liquid. There is your shaft section. Shaft section from the top. I do want to mention this about the tank section, okay. I own three of these suckers, and I cannot get the tank a part for any of 'em. You just... You can't do it. The only way that I think you could probably do it is by taking pliers to it and you'll just scratch the hell out of this thing. And then here's the base section. Coil head screws into the base like so. And once you fill the tank up, just screw in the base section. Drip tip. Something cool they included with this device is a silicon AFC ring for adjustable airflow. I think that's great for the newbies. But I wish they had changed the color. I don't like this color. Maybe something that's clear.
So this is how it works. You slide it over the tank, down to the bottom. And then what you do, you just twist it. You adjust it. Right now it's wide open, so this becomes an adjustable airflow device. Close her off, close her off, close her off. Close her off all the way if you want. Open her up, open her up, open her up. Back to wide open. Cool, cool feature. So I got her all filled up ready to go to work baby. You got the 0.3 ohm coil that it comes with. So that right there is the iJust 2 kit. Let's go ahead and take her back to face time.
A few cons for you. First of all, the fire button as you guys saw in the close ups, it rattles a little bit, okay. It's a little bit shaky. It's a little bit loose. The next con, the iJust 2 tank that came with this kit okay, I cannot disassemble the tank section. That's a con to me. I wanna be able to disassemble the parts and clean them individually, but I can't do so and the last con I found for this device, this AFC silicon ring, why did they include a green one? Why couldn't it be transparent, white, or something? Green? Really? But I like the color green. I do like it, but I don't know if most people would. Most people may want something that's more matchy, matchy with this and that just sticks out like a sore thumb.
So I received this iJust 2 from Eleaf and right now I'm seeing VaporDNA is selling this bad boy for $34.99. Now on to the big question, the big answer of the day, if I lost this today would I go out tomorrow and buy one? Well, to answer your question, I've already bought five of 'em. Five of them with my own money. Bought one for my wife, because hell, I didn't want her hogging mine. No. No. No. And I also bought a couple of others for our employees because, who doesn't enjoy these man. This is just dummy proof. Dummy proof. You just pop the coil in. Fill her, and go. No mini screens, no nothing. Just five clicks to turn her on, five clicks to turn her off. It's so easy. So simple. And the price point, 30 to 35 bucks is what I'm seeing. And I didn't mention this before, but I don't think it's just for the newbie vapors. I think it'd be for anybody. Hell, I'm not a newbie vapor, and I've been enjoying this like crazy.
This is RiP Trippers, and remember smoking is dead, vaping is the future and the future is now.